Westcoat CA-50 Stone Strips
About
CA-50 is designed to be used with a variety of Westcoat’s custom finish systems like Texture-Crete Custom Finish, ALX Custom, ALX Pro Custom and MACoat Custom. Some uses include driveways, walkways, patios, courtyards, entryways, showrooms and pool decks.
Specs
Instructions
Inspection
Surface must be prepared in the proper manner that is required in the System Specification sheet for the desired application.
Preparation
Refer to the appropriate System Specification sheet prior to installation for preparation instructions.
Coverage
Coverage is approximately 500 square feet per box when laid out in a random Flagstone Pattern.
Application
Apply CA-50 Stone Strips to the Grout Coat of the desired Custom Finish System prior to applying the Texture Skip Trowel coat. Ensure the Grout Coat is dry, clean and free of any debris, before application. Peel the backing off an individual Stone Strip and apply it to the Grout Coat. Continue adding other strips to form a random Flagstone Pattern. Make sure the strips are rubbed down very well, to eliminate any bleeding from the Texture Coat. Apply the Texture Skip Trowel coat per desired System Specification Sheet instructions. Remove the Stone Strips once the Texture Coat is dry. For best results, do not leave the CA-50 down for longer than 24 hours.
