Westcoat TC-5 Grout Texture Cement
TC-5 used in Slurry Coat (Grout Coat) application @ 9:54
About
TC-5 is primarily used in conjunction with WP-81 and WP-82 Cement Modifiers and used in several Westcoat Systems. It is mainly used to simulate grout color in Custom Finish Systems. TC-5 is also used for the Broom-On™ System.
Specs
- 50 lb. bag
- Coverage: ~100 to 200 sqft. per bag (varies depending on use)
- Color: Gray
- Mix Ratio: Varies depending on use (Must mix with WP-81 or WP-82 and water)
- VOC Content: Zero VOC
Instructions
Primer
Mix four gallons of water with one gallon of WP-81 (4 to 1 ratio for a total of 5 gallons) and apply it at a rate of 200-300 square feet per gallon. Roll or spray WP-81 primer over the area to be textured. Only prime areas to be coated the same day. For best results, prime and trowel into damp WP-81 primer. EC-11 Water-Based Epoxy can be used as a primer in place of WP-81 for maximum adhesion.
Mixing
Must add WP-81 or WP-82 and water. See specific System Specification Sheet for mixing instructions.
Coverage
One 50 pound bag will cover 100 square feet to 200 square feet. Coverage will vary depending on use.
Applying Product
TC-5 may be troweled, squeegeed or broomed. See specific System Specification Sheet for detailed application information.
See More