Westcoat CA-36 Epoxy Color Pack
About
CA-36 is the pigment added to EC-36 100% Solids Epoxy and together they are used to create industrial seamless floors in manufacturing plants, mechanical warehouses, industrial kitchens and garages. It can be used as a primer coat, filler coat, broadcast coat or topcoat.
Specs
- Package: 32 fl. oz. container
- VOC Content: <100 gm/l
- Available Colors: Cape Cod Gray, Concrete Gray, Deep Tan, Pewter Gray, Tile Red, Travatan
- Mix Ratio: 1-quart per 3-gallon mix of Epoxy
- Shelf Life: 2 years in unopened packaging
CA-36 Tile Red Epoxy Color Pack Safety Data Sheet
CA-36 Pewter Gray Epoxy Color Pack Safety Data Sheet
CA-36 Deep Tan Epoxy Color Pack Safety Data Sheet
CA-36 Concrete Gray Epoxy Color Pack Safety Data Sheet
CA-36 Cape Cod Gray Epoxy Color Pack Safety Data Sheet
Instructions
Mixing
- Premix each component separately.
- Add one 32 fluid ounce unit of CA-36 per 3 gallon kit of EC-36 Epoxy.
- Mix the entire contents of CA-36 into the EC-36 Part A and mix thoroughly, before combining the Part B.
- Mix thoroughly with a low speed (400-600 rpm) drill motor for 3-4 minutes.
- Make sure to scrape the sides and bottom of the container during mixing.
- After mixing is completed, remove material from container within 5 minutes, as epoxy will begin to generate heat.
- Spread immediately onto the floor. As product is spread out, you will have longer working time (10-15 minutes at 70°F).
Westcoat CA-36 Epoxy Color Pack
View Color Chart
Westcoat’s CA-36 Epoxy Color Pack is an epoxy pigment that can be added on-site to EC-36 100% Solids Epoxy.
Color will vary between products and sheens. Colors are for reference only. Please request an actual color sample or apply sample on site before beginning any project.
- Convenient on-site pigmenting of 100% solids epoxy
- Save money and only tint what you need
- Improve customer satisfaction with on-site color selection
- Allows tinting of Westcoat EC-36 100% Solids Epoxy
- Available in 6 colors
About
CA-36 is the pigment added to EC-36 100% Solids Epoxy and together they are used to create industrial seamless floors in manufacturing plants, mechanical warehouses, industrial kitchens and garages. It can be used as a primer coat, filler coat, broadcast coat or topcoat.
Specs
- Package: 32 fl. oz. container
- VOC Content: <100 gm/l
- Available Colors: Cape Cod Gray, Concrete Gray, Deep Tan, Pewter Gray, Tile Red, Travatan
- Mix Ratio: 1-quart per 3-gallon mix of Epoxy
- Shelf Life: 2 years in unopened packaging
CA-36 Tile Red Epoxy Color Pack Safety Data Sheet
CA-36 Pewter Gray Epoxy Color Pack Safety Data Sheet
CA-36 Deep Tan Epoxy Color Pack Safety Data Sheet
CA-36 Concrete Gray Epoxy Color Pack Safety Data Sheet
CA-36 Cape Cod Gray Epoxy Color Pack Safety Data Sheet
Instructions
Mixing
- Premix each component separately.
- Add one 32 fluid ounce unit of CA-36 per 3 gallon kit of EC-36 Epoxy.
- Mix the entire contents of CA-36 into the EC-36 Part A and mix thoroughly, before combining the Part B.
- Mix thoroughly with a low speed (400-600 rpm) drill motor for 3-4 minutes.
- Make sure to scrape the sides and bottom of the container during mixing.
- After mixing is completed, remove material from container within 5 minutes, as epoxy will begin to generate heat.
- Spread immediately onto the floor. As product is spread out, you will have longer working time (10-15 minutes at 70°F).
